Tips for Creep Feeding Calves

Jun 14, 2021


One way to provide feed to calves while they are still nursing is through “creep feeding.” Creep feeding is the practice of providing supplemental feed to suckling calves while restricting access of older cattle. This is typically done using a feeder surrounded by a pen with narrow openings for calves.
The goal of this practice should be to increase the weaning weight of calves. Depending on the cost of feed and the price of calves, creep feeding may or may not be profitable. A good rule of thumb is: the selling price per pound of calf should be greater than 10 times the cost per pound of the creep. It could take about 10 lbs. of feed per pound of gain. There are many different rations that could be fed as creep feed, but as a general guideline the feed needs to be primarily grain-based (corn, oats, barley, etc.), with enough added meal-type feeds (cottonseed, soybean, or alfalfa meals, e.g.) to make a protein content of about 15%.
Calves are usually fed for the last 3 months of the nursing period and typically gain 40 – 60 lbs. of additional weight. Each calf will need approximately 3.5 lbs. of creep per day during the first month, 5 lb/d for the second month and 6.5 lbs/d in the final month of creep feeding.
It is important to keep a close eye on the calves to keep them from getting too fat. This is not an efficient use of feed resources and may actually be detrimental to calf sale price. Buyers of stocker (weaned calves) and feeder cattle (yearling cattle) resist buying over-conditioned calves because those calves do not gain as efficiently in the next production phase as the thinner calves. Also, female calves destined to be replacement heifers should not be over-conditioned, as fat deposited in the udder lowers the amount of milk secretory tissue she develops and decreases her future milk production potential.
Remember not to feed rations that do not allow you to put weight on the calves economically. You need to recover the cost of feeding by selling extra calf weight. Base purchase price of your creep feed ingredients on cost per pound of nutrient (protein or energy), not total cost per ton for that feedstuff.
Another way to provide additional nutrients to calves is through “creep grazing” on pasture. This is where the calves get access to the pasture before the cows so they can get the most succulent forages. This can be accomplished by use of breaks in the fence only large enough for calves to get through or electric fence wire placed high enough for calves to scoot under, yet low enough to exclude cows.
Because creep-feeding calves does not decrease milk yield from the mother cow, it does not lower her nutrient requirements. Therefore, supplementing the calves is not intended to help the cow with her body condition (energy reserves). What happens is that calves continue to suckle similar amounts of milk, but decrease the amount of forage (hay or pasture) they consume to make room for the supplement. Research has shown that if the goal is to improve cow condition, it is more economical to increase cow feed rather than creep-feed calves.
If cows are extremely thin, you should consider early weaning of calves. A nonlactating cow has lower nutritional requirements than a lactating one. Early weaning helps cows improve body condition quickly so that they are able to support fetal development of a new calf, have less difficulty during calving, produce good colostrum and ample milk, and rebreed for the next calf in a timely manner. Although early weaned calves will have to be fed more forages and concentrates (grains and seed meals) to make up what they would miss with milk, this practice is economically beneficial over the long-run, especially in years when forage is very limited. Good reproductive efficiency (producing one calf every 365 days) is actually more important than calf weaning weight in the overall economic efficiency of beef production.
Successful creep-feeding is where income from increased calf weaning weight exceeds the cost of feed required to gain that weight. Be sure you formulate rations and calculate costs accurately.
Good luck with your calves! For more content like this, check out the latest issue of the Cooperator.

Read More News

Apr 02, 2024
The first step in deciding what feed or feed type is best for your cattle is to verify which nutrients are limiting or preventing the utilization of forage energy. Grazing cattle make their choice of diet by selectively grazing the pasture they are housed on, which can be of unknown nutrient composition. It is well established that cattle have nutrient requirements that vary with weight, production level, environmental condition, and genetics. It is relatively easy to determine these nutrient requirements for a specific beef animal — as well as the makeup of the forages used to model feedstuffs that provide important components not found in the basal forage diet.
Mar 04, 2024
We all deal with some sort of change almost every day of our lives — from changes in our surroundings such as the weather, to bigger changes that involve losing a loved one or a good friend that moves away. This may sound cliché, but change is most certainly inevitable. This is especially true in the field of agriculture. 
 
Feb 05, 2024
A cold, January rain begins pattering the hood of his pickup as Lobelville cattleman Tim Byrd pulls up to the metal gate of his pasture. Across the fence, members of his commercial cow/calf herd look on expectantly, gathering near the fence.