Eyes on the boll

May 02, 2022


Story by Mark Johnson
 
For those not familiar with it, the incredibly innocuous name “plant bug” might illicit a chuckle on first hearing.
“Aren’t all bugs plant bugs?” you may ask.
But for fruit, vegetable, and row-crop farmers — cotton producers, in particular — plant bugs are no laughing matter, and their name is synonymous with expensive inputs and lowered yields. Increased numbers of the insect, more specifically, the tarnished plant bug (TPB), are creating big problems within the cotton industry in parts of the Southeastern U.S.
The TPB (Lygus lineolaris) is a member of the miridae insect family, which also includes the equally innocuous leaf bugs and grass bugs, among others. Adult TPBs are a quarter inch long, are usually brown with yellow, orange, or red tints, and display a small, whitish “V” on their backs. Though mainly blamed for damage to fruit and vegetable crops in the northeast U.S., TPBs have developed a taste for cotton in the Delta, Tennessee Valley, and Upper Mid-South regions.
TPB populations exceeding actionable thresholds in early growth stages of cotton can result in reduced plant height and boll weight, damaged bolls, swollen nodes, deformed leaves, and delayed maturity. According to the Entomological Society of America, an average of six insecticide applications were made targeting the TPB during the 2013 growing season in Mississippi. That same year, 76,497 bales were lost in the state due to damage from the insect.
“Historically, plant bugs haven’t been a huge problem in our part of the country, but that has changed over the past few years,” says GreenPoint Ag agronomist, Drew Schrimsher. “Whether it has been the previous year’s above average rainfall or something else, the migration patterns for TPBs have shifted, and now our cotton crops are being impacted. These types of plant bug numbers are something producers in the lower Southeast, especially along the Gulf Coast area, have not had to manage as intensely in prior years. We had some fields severely damaged last year, and I don’t think some of the producers were entirely aware that it was plant bug related.”
Schrimsher says the insects tend to migrate out of wild host plants and into cotton early in the growing season.
“There are several different options for host plants, but TPBs seem to prefer daisy fleabane, which is common everywhere,” he says. “That plant flowers from late April all the way through May and starts maturing down in June. The insects come out of the daisy fleabane looking for young, tender vegetation. They are also known to migrate into corn where they don’t do damage but reproduce and build numbers quickly before moving over into cotton.”
The signs of TPB infestation become noticeable, Schrimsher says, starting around the first square — 27 to 38 days after seedling emergence.
“The TPBs seem to start by focusing on young squares, which will eventually become the blooms,” he explains. “After flowering, they’ll start feeding on small bolls — up to about five days old and any new squares being formed in the terminal growth.”
After first bloom, damage to bolls from both adults and nymphs may appear very similar to stink bug injury. Bolls more than 14 days old are typically not preferred feeding sites and are relatively immune to injury.
Schrimsher says that intense scouting is the first key to controlling plant bugs.
“At this point, the producer should be looking for ‘blasted’ squares that have turned brown and dried up, or damage to young bolls,” he says. “That’s what you’re focusing on. You then need to determine the percentage of these necrotic bolls; I generally recommend treatment at around the 20% and above threshold.”
The product used for the initial treatment may vary regionally due to resistance of certain classes of insecticides, but Schrimsher recommends a neonicotinoid class of insecticide in early squaring stages. These tend to be less harsh on the beneficial insects that help manage spider mites, he says.
“Products like WinField United’s Tundra and Delta Gold are pyrethroids and still provide adequate control for plant bugs in the lower southeast,” says Schrimsher. “We also like a newer product from Adama called Diamond that has increased in popularity due to its ability to control plant bugs. It differs from the others because it provides residual control. We like to pair it up with either Tundra or Delta Gold at the first bloom.”
He explains that after the Tundra
or Delta Gold initially knocks down adult TPBs on contact, the IGR (insect growth regulator) chemistry of
Diamond will provide residual control for several days and control newly hatched plant bugs as they emerge and begin to grow. Schrimsher also recommends using WinField United’s Interlock adjuvant in the tank mix to deliver the chemistry further into the canopy of the plant, where plant bugs often hide underneath the leaves.
“I think the way to control these
things successfully is to start early in the season and stay on top of them until the plant has matured out of danger,” he says. “Have a comprehensive scouting plan and work closely with your Co-op and GreenPoint Ag agronomists to come up with a solid plan.”
 
Cutlines:
 
Main image: More than ever before, the tarnished plant bug (Lygus lineolaris) is making its presence known in the mid-South's cotton-producing regions. The insect attacks cotton during its first-square stage, targeting new bolls and resulting in impacts ranging from substantial yield decreases to entire crop loss.
 
Cotton Field: Agronomists say intense scouting and decisive action is key to tarnished plant bug control and advise using a combination of contact neonic-based products followed by longer-termed residuals. The choice of insecticide is also determined by the amount of resistance found in the area population of tarnished plant bugs.

Read More News

Sep 06,2022
As the hot days of September begin, farmers across the Southeast are preparing for harvest. In cotton country, preparation often involves pulling the cotton pickers into the shop and performing general maintenance like replacing worn spindles and moisture pads, adjusting doffers, and generally making sure the machine is ready to operate as effectively as possible.
 
Aug 01,2022
The first seven months of 2022 have evaporated, and mid-South farmers now find themselves within a stone’s throw of harvest season. Gone are the days of relying on time-worn hunches, a can of WD-40, and the Farmer’s Almanac when preparing for the season. In today’s high-tech farming, a pre-harvest checklist for combine set-up and calibration is mandatory for producing the accurate data that will inform next year’s high yields.
 
Jul 05,2022
 In terms of agriculture, annual ryegrass has traditionally been viewed as a southern forage best suited to states that border the Gulf coast. But in recent years, new hybrids and improved field data have created inroads into areas with cooler climates, including Tennessee.