Agronomy > Prepare Your Spreader Now for the Spring Rush

Prepare Your Spreader Now for the Spring Rush

Feb 01, 2021

By Julia Austin, GreenPoint Ag Marketing Manager — Digital Experience
 
With spring fast approaching and planting season just around the corner, now is the time to ensure your fertilizer spreader is ready for the task. Spreaders that have been idle over the winter months need a thorough service and inspection to safeguard against in-season downtime. Follow these seven steps to get ahead of the game before it starts.
 
1. Check for any broken welds, including hopper, tongue, and sub-frame. 

2. Inspect and replace broken or worn spinner fins. 

3. Inspect the conveyor chain for damage and adjust to the proper specs. 

4. Inspect and grease all bearings including wheel hubs.

5. Check the gearbox fluid levels (if equipped). 

6. Verify that the gate opening and flow divider are set at the appropriate position for the product being spread.

7. Run a spread test over pans to verify a uniform pattern. Performing the steps on this checklist, as with all preventive maintenance, can greatly reduce the cost and extend the life of your spreader.
 


Read More News

Apr 05, 2021
A rare Arctic weather system dipped into the deep South in mid-February, plunging temperatures into historic lows and covering much of West and Middle Tennessee in a dangerous layer of snow and ice...
Mar 01, 2021
Spring — and planting season — is around the corner. Now is the time to perform some maintenance on equipment and prepare a data collection plan.  
Jan 25, 2021
 Almost every grower has at least one field with drainage issues. Although it may sometimes seem hopeless, there are some ways to improve a field’s drainage.  Listed below are three...